TXQ Darksaber Mandalore Stand [Digital File] 3dprint I recommend a minimum of

I recommend a minimum of 25% infill to give it a good weight

Use of this product is at the user's own risk

The blade holder diameter is 7/8" or 22

Empty hilt (No electronics)

Please do not purchase if you do not own a hilt from this series

TXQ Darksaber Mandalore Stand [Digital File] 3dprint I recommend a minimum ofThis is a set of 3D files for home printing of the TXQ Darksaber stand. Printing Recommendations: Print the base in an upright position, requires no supports but if you want to add in the overhangs you can. Print the blade plug piece in the horizontal position to improve the strength I recommend a minimum infill of 25% to give it good weight. PLA or PETG work well. Maximum layer height: 0. 2 mm. Minimum of 3 walls, 3 bottom layers, and 3 top layers.